MUTOH Valuevet VJ-628X - Encoder Menu

5.4.5 Encoder Menu 258
5.4 Test Menu VJ628XE-M-00
5.4.5 Encoder Menu
This menu is used to display the detected values from the following encoders:
• CR encoder
• PF encoder
NOTE
For the encoder-detected values, the encoder pulse numbers are displayed in
hexadecimal number.
• Encoder values are displayed as follows.
・CR Encoder: approximately 35.28μｍ
・PF Encoder: approximately 2.73μｍ
>@
>!@
㹁㹦㹣㹡㹩ࠉ㸯㸸㹒㹣㹱㹲
[Enter]
[Cancel]
㹃㹬㹡㹭㹢㹣㹰㸸ࠉ㹎㹄ࠉࠉࠉࠉࠉ㸮㸮㸮㸮
㹃㹬㹡㹭㹢㹣㹰㸸ࠉ㹁㹐ࠉࠉࠉࠉࠉ㸮㸮㸮㸮
㹒㹣㹱㹲ࠉ㸳㸸㹃㹬㹡㹭㹢㹣㹰
[Enter]