2.3 Troubleshooting Without Error Messages VJ628XE-M-00
2.3.6 Other Problems 55
2.3.6 Other Problems
　
Table 2-11 Symptoms, Check Items, And Actions
No. Symptom Check item Action Reference
1 The printer hangs up 1.
The internal processing of MAIN board may be
faulty.
Initialize parameters, re-input or readjust it, and
then check the operation again.
"5.9.2Parameter Update Menu
"5.9.2Parameter Update Menu
2. MAIN board may be damaged. Replace MAIN board.
"3.5.10Replacing MAIN Board
2 The power is shut down
during printing
1. Is Power cable short circuited? Check it with a tester.
-
2. Is there electrical leakage? Check if the cable film is peeling and touching
the
chassis.
-
3. Check power supply voltage (DC24V). Replace Power board.
"3.5.1Replacing Power Board
4. Power board may be damaged.
3 Ink cartridges cannot be
inserted
1. Is it installed correctly? Install it correctly. Operation Manual
2. Are Ink bags used dedicated ink bags? Instruct the user to use the dedicated ink bags.
4 Ink spills out of Waste fluid
tank
1. Are there any foreign substances or ink accumulated in
Waste fluid tank.
Remove the foreign substances.
"3.10.8Replacing Waste Fluid
Tank
5 Ink spills out of Maintenance
Ink receiver
1. Are there any foreign substances or ink accumulated in
Maintenance Ink receiver?
• Remove the foreign substances.
• Replace Maintenance Assy.
"3.10.7Replacing Maintenance
Assy
Operation Manual
2. PVA sponge may not be able to absorb ink. Replace PVA sponge.
To Next Page
Loading...
Need help?
General