3.11.6 Replacing HEATER DRIVE Board 172
3.11 Replacing IH VJ628XE-M-00
3.11.6 Replacing HEATER DRIVE Board
● Tools & Jigs & Maintenance part
This section describes the procedure to replace the maintenance part,AC
JUNCTION Board Assy.
In this section, it is referred to as HEATER DRIVE Board.
Name No. Remarks
AC JUNCTION Board Assy DG-44710 Exploded View IH L
Phillips screwdriver No.2 Generic
products
-
1 Removing L Side Cover.
3.2.2 Removing Side Cover
2 Remove all the cables from HEATER DRIVE
Board.
3 Remove the screws (4 pieces) retaining
HEATER DRIVE Board.
A : Cup screw M3x6 Zn-CM2
B : HEATER DRIVE Board
4 Replace HEATER DRIVE Board.
5 To reassemble unit, reverse the removal
procedure.
To Next Page
Loading...
Need help?
General