MUTOH Valuevet VJ-628X - Replacing X Speed Reduction Belt

3.7.4 Replacing X Speed Reduction Belt 113
3.7 Replacing PF section VJ628XE-M-00
3.7.4 Replacing X Speed Reduction Belt
● Tools & Jigs & Maintenance part
NOTE
This section describes the procedure to replace the maintenance part, PF Timing
Belt Assy.
n this section, it is reffered to as X Speed Reduction Belt.
Name No. Remarks
PF Timing Belt Assy DG-44700 Exploded View PF Motor
Phillips screwdriver No.2 Generic
products
-
Tension gauge
Max:40N(4,080gf）
1 Removing L Side Cover.
3.2.2 Removing Side Cover
2 Remove CR Motor.
3.6.1 Replacing CR Motor
3 Remove the screws (2 pieces) retaining PF
Encoder.
A : PF Encoder
B : Tapping screw M2ｘ8
4 Remove PF Encoder.
A
B
5 Remove the screws (4 pieces) retaining ENC
Holder.
A : ENC Holder
B : Tapping screw M3ｘ8P Tight cup
C : PF Encoder Scale
6 Loosen the screws (2 pieces) retaining PF
Motor.
A : Pan-head screw with spring washer and
flat washer M4ｘ8
B : X Speed Reduction Belt
7 Remove X Speed Reduction Belt.
A : X Speed Reduction Belt
8 To reassemble unit, reverse the removal
procedure.
9 Perform various adjustments.
4.2 Adjustment Item
A
B
BC
B
A
A