MUTOH Valuevet VJ-628X - Print Head Endurance (Nozzle Print) Menu

5.11.8 Print Head Endurance (Nozzle Print) Menu 338
5.11 Endurance Running Menu VJ628XE-M-00
5.11.8 Print Head Endurance (Nozzle Print) Menu
This menu is used to perform sequential printing to perform the endurance running of Print
head.
The available settings are shown below.
㨀㧵㧼
• If the number of endurance running cycles is set to -1, Print heads continuously
repeats endurance running until cancel input is given from Operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-
digit number). If the number of cycles exceeds the maximum value, the counter
displays 99999999.
• printing method
speed: 320cps
wave form: VSD4
dot: Large
Set item Contents Set value Remark
Number of endurance
running cycles
Set the number of
endurance running
cycles.
-1 to 10000 -
[Enter]
[Enter] /
[Cancel]
㹁㹦㹣㹡㹩ࠉ㸶㸸㹃㹬㹢㹳㹰㹟㹬㹡㹣
㹁㹭㹳㹬㹲㸸ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㸯㸮ࠉ
㹃㹬㹢㸸ࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉࠉ㸳㸮
[Enter]
㹊㹧㹤㹣㹁㹭㹳㹬㹲㸸ࠉࠉࠉࠉࠉࠉࠉࠉ㸳㸮
[Enter]
㹊㹧㹤㹣ࠉ㸶㸸㹌㹭㹸㹸㹪㹣
Endurance Count Pressing [+] /[-] key.
Completing endurance or [Cancel]
Performing endurance

running times of the endurance
4 color setting
media feeding direction