3.10.1 Replacing Waste Fluid Pump 157
3.10 Replacing Maintenance VJ628XE-M-00
3.10 Replacing Maintenance
3.10.1 Replacing Waste Fluid Pump
● Tools & Jigs & Maintenance part
Since ink may drip, work covering with a waste clothes etc. downward.
This section describes the procedure to replace the maintenance part, Diaphragm
Pump Assy.
In this section, it is referred to as Waste Fluid Pump.
Name No. Remarks
Diaphragm Pump Assy DG-43907 Exploded View Maintenance
Phillips screwdriver No.2 Generic
products
-
1 Removing R Side Cover.
3.2.2 Removing Side Cover
2 Move Carriage to the left side of Origin.
3.8.1 Releasing Carriage Lock
3 Remove Pump Motor Cable from Waste Fluid
Pump.
A : Connecting point
4 Remove Waste Fluid Tubes (2 pieces) from
Waste Fluid Pump.
5 Remove the screws (2 pieces) retaining
Waste Fluid Pump.
A : Pan-head screw with spring washer and
flat washer M3ｘ10
B : Waste Fluid Tube
（φ3ｘ5）
6 Replace Waste Fluid Pump.
7 To reassemble unit, reverse the removal
procedure.
To Next Page