4.3.1 Parameter Backup 180
4.3 Working with MUTOH Service Assistance Software VJ628XE-M-00
4.3.1 Parameter Backup
The NVRAM (Flash-ROM) installed on the MAIN board Assy stores various parameters for
the system operation.
The available backup parameters are as follows.
• Panel setting parameters
• Mechanism adjustment parameters
• Main board-unique adjustment parameters
The MAIN board-unique adjustment parameters cannot be erased or modified.
If the MAIN board Assy is found to need replacement during maintenance operations, make
sure to back up the parameters. The backup data can be used to restore the original system
status, omitting some adjustment steps.
"4.3.8Receiving Backup Parameters
"4.3.9Sending Backup Parameter
To Next Page