5-4 Calibration and Adjustment
9. For fine focus using the lens focus adjustment, perform the following steps:
a. Loosen the locking ring on the camera lens (Figure 5-3).
b. Turn the middle section of the camera lens, clockwise or counterclockwise, until a
sharp image is obtained in the Video Window (Figure 5-3).
c. Tighten the locking ring to lock the focus (Figure 5-3).
1 Locking Ring
2 Middle Section
Figure 5-3 Additional Adjustments
10. Perform camera calibration. See 5.6 Calibrating the Camera.
11. Perform machine offset procedures. See 4.9 Valve Offsets.
12. Adjust the lighting and color levels. See 4.8.2 Lighting and Color Adjustment.
13. Once image quality is achieved proceed to 4.10.6 Teaching Fiducials.
To Next Page
Loading...
