6. Click the Page Setup tab to display the Page Setup sheet.
7. Click Roll Paper in the LPaper Source list.
8. Select the width of the loaded roll in the MRoll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
9. In the APage Size list, click the size of the original as specified in the application. In this case,
click ISO A4.
10. Select the CEnlarged/Reduced Printing check box.
11. Select the DFit Paper Size check box.
12. Click ISO A3 in the GPaper Size list.
13. Confirm the print settings and print as desired.
Note
･ For tips on confirming print settings, see "Confirming Print Settings (
4.1.3)"
To Next Page
Loading...
