Oce CS2436 - Adjusting the Vacuum Strength (Vacuumstrngth)

Adjustments for Better Print Quality (CS2436-7)
7. 2. 6. Adjustments for Better Print Quality > Adjusting the feed amount >
Adjusting the Vacuum Strength (VacuumStrngth)
When printing on heavyweight paper or paper that curls or wrinkles easily, if the Printhead rubs
against paper, adjusting the level of suction against paper on the Platen may improve results.
1. On the Tab Selection screen of the Control Panel, press or to select the Paper tab (
).
Note
･ If the Tab Selection screen is not displayed, press the Menu
button.
2. Press the OK button.
The Paper Menu is displayed.
3. Press or to select Paper Details, and then press the OK button.
4. Press or to select the type of paper, and then press the OK button.
5. Press or to select VacuumStrngth, and then press the OK button.
6. Press or to select the desired setting value, and then press the OK button.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp70.html (25 of 25) [4-3-2010 11:36:36]