3. 1. 1. Enhanced Printing Options > Adjusting Images >
Adjusting the Color in the Printer Driver
Color settings specified in the application for your documents are essentially given priority over other
settings for each print job, but further color adjustment is possible in the printer driver.
Color Mode
Choose how the printer driver processes color, as desired.
The available options vary depending on the color mode.
Color Mode Description Color Adjustment
Color
Print in color.
You can adjust the color
balance and color-
matching method.
Monochrome
Print in grayscale.
You can adjust the color
balance.
Color (CAD)
A color mode optimized
for line drawings (2D-
CAD). Lines in red,
yellow, and other colors
are printed especially
clearly.
You can adjust the color
balance.
Monochrome (BK ink)
A color mode for printing
line drawings. Only Black
ink is used.
You can adjust the color
balance.
Monochrome Bitmap
Print in a color mode for
CAD, using Color Ink,
with all non-white
portions printed in black.
No color adjustment is
supported.
Color Adjustment
You can adjust colors separately for images, graphics, and text documents.
Adjustment Item Description
Cyan
Fine-tune color tones by adjusting the levels of Cyan,
Magenta, and Yellow.
Magenta
Yellow
Gray Tone
Adjust the gray tone to suit the images of monochrome
photos. Choose cool black (tinged with blue), pure black
(neutral), warm black (tinged with red), and so on. Select the
color tone in the color region or from the list.
Brightness
Adjust the brightness of printed images while keeping the
darkest and lightest portions intact.
To Next Page
Loading...
Need help?
General