12. Error Message
12. 1. Error Messages
1. Borderless printng not possible.
2. Cannot adjust paper feed.
3. Cannot adjust printhead.
4. Cannot detect papr
5. Check printed document.
6. Close Ink Tank Cover
7. Do not pull out ink tank.
8. End of paper feed.
9. ERROR Exxx-xxxx (x represents a letter or number)
10. Error in cutter position.
11. Execute printhead cleaning.
12. GARO Wxxxx (x represents a number)
13. GL2: W0502 The parameter is out of range.
14. GL2: W0504 This command is not supported.
15. GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
16. Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
17. Ink insufficient.
18. Ink tank is empty.
19. Insert the maintenance cartridge.
20. Insufficient paper for job
21. Maint. cart. The level is low
22. Maintenance cartridge full.
23. Maintenance cartridge problem.
24. MediaType Mismatch
25. Multi-sensor error
26. No ink left.
27. No ink tank loaded.
28. No Maintenance Cartridge capacity.
29. No printhead
30. Not much ink is left.
31. Paper cutting failed.
32. Paper is crooked.
33. Paper jam
34. Paper not aligned with right guide.
35. Paper position not suitable for borderless printing.
36. Paper size not detected.
37. PaprWidth Mismatch
To Next Page
Loading...
Need help?
General