10. 1. 4. Maintenance > Ink Tanks >
When to Replace Ink Tanks
Replace or prepare to replace ink tanks in the following situations.
If a message for checking the ink is shown on the Display Screen
When there is little ink left, the Message Lamp is lit and "Not much ink is left." is shown on
the Display Screen. You can continue to print, but prepare to replace the Ink Tank. (See
"Checking Ink Tank Levels (
10.1.3).")
Before print jobs and maintenance that consume a lot of ink
If little ink is left, there may not be enough for large-format printing, head cleaning, and
maintenance, which require a lot of ink. In this case, replace or prepare to replace the Ink Tank
before maintenance.
If a message for ink replacement is shown on the Display Screen
When ink runs out, the Message Lamp flashes, a message regarding Ink Tank replacement is
shown on the Display Screen, and printing is disabled. Replace the Ink Tank at this point.
To Next Page
Loading...
Need help?
General