8. 1. 8. Printer Parts > Printer parts >
Control Panel
a. Display Screen
Shows printer menus, as well as the printer status and messages.
b. Data Lamp (green)
● Flashing
During printing, the Data lamp flashes when the printer is receiving or processing print jobs. Otherwise, this lamp
flashes when the print job is paused or the printer is updating the firmware.
● Off
There are no active print jobs when the Data lamp is off.
c. Message Lamp (orange)
● On
A warning message is displayed.
● Flashing
An error message is displayed.
● Off
The printer is off or is operating normally.
d. Power button (green)
Turns the printer on and off. (See "Turning the Printer On and Off (8.2.2).")
The Power button is lit when the printer is on or in Sleep mode.
e. Stop button
Cancels print jobs in progress and ends the ink drying period.
f. Navigate button
Enables you to check instructions for loading and removing paper or replacing ink tanks or printheads, as well as
other operations. (See "How to View Instructions With Navigate (
8.2.4).")
g. Arrow buttons
● button
Press this button on the Tab Selection screen to move to another tab.
In menu items requiring numerical input, press this button to move to another digit.
● button
Press this button when viewing menus to display the next menu item or setting value.
● button
Press this button on the Tab Selection screen to move to another tab.
In menu items requiring numerical input, press this button to move to another digit.
● button
Press this button when viewing menus to display the next menu item or setting value.
h. OK button
Press this button on the Tab Selection screen to display the menu of the tab shown.
Pressing this button in menu items of each tab for which is displayed at left will move to the lower level of the menu
To Next Page
Loading...
Need help?
General