item, enabling you to execute menu commands or set menu values.
Also press this button if the Display Screen indicates to press the OK button.
i. Back button
Displays the screen before the current screen.
j. Menu button
Displays the Tab Selection screen. (See "Menu Settings (8.2.8).")
k. Load button
Press this button when loading or replacing paper.
(See "Loading Rolls in the Printer (6.2.2).")
(See "Loading Sheets in the Printer (6.3.1).")
l. Feed button
Pressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper Manually (6.2.10).")
m. Cut button
Pressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in Cutting Mode in
the Control Panel menu. (See "Specifying the Cutting Method for Rolls (
6.2.13).")
n. Cut Sheet lamp (green)
Lit when sheets are selected as the paper source.
o. Roll Media lamp (green)
Lit when rolls are selected as the paper source.
Note
･ To recover from Sleep mode, any button can be pressed except the Power button.
To Next Page
Loading...
