12. 1. 44. Error Message > Error Messages >
Roll paper is not securely in contact with roll holder.
Cause Corrective Action
When the roll was
loaded, the roll was
not inserted firmly all
the way on the Roll
Holder.
Follow these steps to reload the roll.
1. Press the OK button and remove the roll
holder from the printer.
2. Insert the roll firmly on the Roll Holder
until it touches the flange.
(See "Attaching the Roll Holder to
Rolls (
6.2.1).")
3. Load the Roll Holder in the printer.
To Next Page
Loading...
Need help?
General