7. 2. 2. Adjustments for Better Print Quality > Adjusting the feed amount >
Selecting a Feed Amount Adjustment Method (Feed Priority)
Methods of adjusting the amount paper is fed are set in Adj. Priority.
Adjust Adj. Priority to suit your particular printing application.
● Print Quality : Adjusts the feed amount to reduce banding across the sheet in printed
documents.
Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed
settings are applied in addition to the Adj. Quality settings.
● Print Length : Adjusts the feed amount for better accuracy of lines in printed documents.
The settings of A:High or B:Standard/Draft in Adjust Length are applied.
● Automatic : Print Quality or Print Length is selected, depending on Print Priority as
selected in the printer driver at the time of printing.
Image or Office Document : Print Quality is selected.
Line Drawing/Text : Print Length is selected.
Note
･ Either B:Standard/Draft or A:High in the Adjust Length menu is
applied, depending on printer driver settings at the time of printing.
･ If you have selected Easy Settings in the printer driver, follow these steps
to confirm the Print Priority setting.
･ Windows: Click View Settings on the Main tab to display the View
Settings dialog box.
･ Mac OS X: Click View set. on the Main pane to display the View
settings dialog box.
Follow these steps to configure the settings.
1.
Load the paper.
● Attaching the Roll Holder to Rolls (6.2.1)
● Loading Rolls in the Printer (6.2.2)
● Loading Sheets in the Printer (6.3.1)
2. On the Tab Selection screen of the Control Panel, press or to select the Settings/
Adj. tab (
).
To Next Page
Loading...
