7. 1. 4. Adjustments for Better Print Quality > Adjusting the Printhead >
Adjusting Line Misalignment (Head Inc. Adj.)
If printed lines are misaligned, execute Head Inc. Adj. to adjust the angle of inclination of the
Printhead. Executing Head Inc. Adj. requires you to examine a printed test pattern and enter an
adjustment value.
Paper to Prepare
Rolls An unused roll at least 10 inches wide
Sheets One sheet of unused paper of at least A4/Letter size
Perform adjustment as follows.
1.
Load the paper.
● Attaching the Roll Holder to Rolls (6.2.1)
● Loading Rolls in the Printer (6.2.2)
● Loading Sheets in the Printer (6.3.1)
Note
･ When loading paper, specify the type of paper correctly. Using paper
that you have not specified on the printer may cause feeding problems
and affect the printing quality.
･ We recommend loading a type of paper that you use often.
2. On the Tab Selection screen of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
･ If the Tab Selection screen is not displayed, press the Menu
button.
3. Press the OK button.
The Set./Adj. Menu is displayed.
To Next Page
Loading...
Need help?
General