Note
･ If two patterns seem equally good and you cannot decide which one
is better, choose an intermediate value.
For example, choose 11 if you cannot decide whether pattern 10 or 12
is better.
10. Press or to select the pattern number you have decided, and then press the OK
button.
11. Repeat steps 8–10 to specify the adjustment value for D-2 to D-5 and D-7 to D-11.
12. Press the Back button.
13. Press or to select Register Setting, and then press the OK button.
14. Press or to select Yes, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
To Next Page
Loading...
