1. 1. 2. Basic Printing Workflow > Printing procedure >
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
Note
ï½¥ For details on supported sizes and types of rolls, see Paper Sizes. (See "Paper
Sizes (
6.1.2).") (See "Types of Paper (6.1.1).")
ï½¥ If you prefer to wait for the ink to dry after printing and simply eject the
document, you can deactivate automatic cutting and cut the paper manually. (See
"Specifying the Cutting Method for Rolls (
6.2.13).")
1. Turn the printer on. (See "Turning the Printer On and Off (8.2.2).")
2. Load the roll on the Roll Holder. (See "Attaching the Roll Holder to Rolls (6.2.1).")
3. Load the roll in the printer. (See "Loading Rolls in the Printer (6.2.2).")
To Next Page
Loading...
Need help?
General