6. 2. 8. Handling Paper > Handling rolls >
Clearing Jammed Roll Paper
If paper from a roll becomes jammed, "Paper jam." is shown on the Display Screen of the Control Panel.
Remove the jammed paper as follows.
1.
Open the Roll Cover. Use a commercially available cutter or the like to cut the paper of the loaded roll.
Caution
･ When cutting paper, be careful to avoid injury or damage to the printer.
2. Push the Release Lever back.
3. Remove the jammed paper.
● If paper is jammed inside the Top Cover
1. Open the Top Cover and move the Carriage to the left or right side manually, away from
the jam.
To Next Page
Loading...
Need help?
General