ï½¥ When storing printed documents on the Output Stacker, always use it in position (1). If
you do not, printed documents may not be dropped into the Output Stacker, and the
printed surface may become soiled.
ï½¥ When moving the printer, always lift the Support Rod to the Extended position before
use in position (2). If the stacker is not used in position (2), the Basket Cloth may touch
the floor and be soiled or damaged.
ï½¥ The Output Stacker can hold one sheet. When printing multiple pages, remove each
sheet after it is printed.
Note regarding the Extended position
The Output Stacker can be used in the regular position and an Extended position for easy removal of printed
documents.
For information on types of paper you can use with the stacker in Extended position (See "Types of
Paper (
6.1.1).")
Regular position Extended position
Switch the stacker to Extended position as follows.
1.
Lift the Support Rod to the position shown (a) and switch the stacker to Extended position.
To Next Page
Loading...
Need help?
General