12. 1. 35. Error Message > Error Messages >
Paper position not suitable for borderless printing.
Cause Corrective Action
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider than
the supported width for
borderless printing.
Press
or to select Stop Printing,
and then press the OK button.
Use each type of paper only where the
recommended environmental conditions
are met. For details on environmental
conditions for various paper
(See "Types of Paper (6.1.1).")
Select None when you have set
Detect Mismatch in the Control Panel
menu to Warning.
However, note that this error may
affect the printing quality.
The paper is loaded askew.
Press
or to select Fix Paper
Position and straighten the paper so
that the edges are between the ink
grooves for borderless printing.
Insert the roll firmly until it touches the
flange of the Roll Holder.
(See "Attaching the Roll Holder to
Rolls (
6.2.1).")
Select None when you have set
Detect Mismatch in the Control Panel
menu to Warning.
However, note that this error may
affect the printing quality.
Press
or to select Print With
Border, and then press the OK button
to continue printing. The document will
be printed with a border.
To Next Page
Loading...
Need help?
General