3. GL2: W0502 The parameter is out of range.
4. GL2: W0504 This command is not supported.
12. 8. Other Messages
1. GARO Wxxxx (x represents a number)
2. ERROR Exxx-xxxx (x represents a letter or number)
3. Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
4. Top cover is open.
5. Prepare for parts replacement.
6. Parts replacement time has passed.
7. Unknown file.
8. Multi-sensor error
9. Error in cutter position.
To Next Page
Loading...
