38. Parts replacement time has passed.
39. Prepare for parts replacement.
40. Printhead error
41. Regular printing is selected, but a roll is loaded.
42. Rel lever is in wrong position.
43. Remaining level of the ink cannot be correctly detected.
44. Roll paper is not securely in contact with roll holder.
45. Roll printing is selected, but sheets are loaded.
46. Roll printing is selected.
47. Sheet printing is selected.
48. The paper is too small.
49. The paper is too small.
50. The roll is empty.
51. This paper cannot be used.
52. This type of paper is not compatible with HP-GL/2.
53. Top cover is open.
54. Unable to detect ink level correctly.
55. Unknown file.
56. Wrong ink tank.
57. Wrong maintenance cartridge.
58. Wrong printhead.
12. 2. Messages regarding paper
1. MediaType Mismatch
2. The paper is too small.
3. The paper is too small.
4. PaprWidth Mismatch
5. Paper size not detected.
6. Insufficient paper for job
7. This paper cannot be used.
8. Roll printing is selected.
9. Roll printing is selected, but sheets are loaded.
10. The roll is empty.
11. Sheet printing is selected.
12. Regular printing is selected, but a roll is loaded.
13. Paper jam
14. Paper is crooked.
15. Paper not aligned with right guide.
16. Cannot detect papr
17. Paper cutting failed.
18. End of paper feed.
To Next Page
Loading...
Need help?
General