Oce CS2436 - Replotting with Hp-Gl;2 Jobs Is Not Possible

Troubleshooting (CS2436-11)
11. 8. 9. Troubleshooting > HP-GL/2 problems >
Replotting with HP-GL/2 jobs is not possible.
Cause Corrective Action
The data was lost because of
replotting.
Data for replotting is lost after the
following operations. In this case, send
the print job again.
･ The memory buffer was cleared
from the Control Panel.
･ The printer was turned off.
･ The printer has received a new HP-
GL/2 print job.
･ Printing has been canceled
2]file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205/...port/iPF750%20User%20Manual/lang/print/cp08.html (66 of 75) [4-3-2010 11:37:2