12. 1. 11. Error Message > Error Messages >
Execute printhead cleaning.
Cause Corrective Action
The Printhead
nozzles are clogged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing or to select
Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead (
10.2.3).")
If this message is still displayed, replace the
Printhead.
(See "Replacing the Printhead (10.2.4).")
Press
or to select Print, and then press the
OK button to resume printing. However, note that
this error may affect the printing quality.
If OK is shown on the Display Screen, clean the
Printhead.
1. Press the OK button on the Control Panel to
stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead (
10.2.3).")
If this message is still displayed, replace the
Printhead.
(See "Replacing the Printhead (10.2.4).")
To Next Page
Loading...
