11. 5. 10. Troubleshooting > Problems with the printing quality >
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is
out of adjustment.
Adjust the feed amount.
(See "Adjusting the Feed
Amount (
7.2.1).")
The type of paper specified
in the printer driver does not
match the type loaded in the
printer.
Load paper of the same type as you have
specified in the printer driver.
(See "Loading Rolls in the Printer (6.2.2).")
(See "Loading Sheets in the
Printer (
6.3.1).")
Make sure the same type of paper is
specified in the printer driver as you have
loaded in the printer.
1. Press the Stop button and stop
printing.
2. Change the type of paper in the
printer driver and try printing again.
To Next Page
Loading...
Need help?
General