6. 2. 12. Handling Paper > Handling rolls >
Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still
wet, it may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface
during ejection, soiling it. You can prevent problems by adjusting the drying time after printing before the paper
is cut.
Windows
1.
Display the printer driver dialog box.
(See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows) (4.1.7).")
2. Select the Main sheet and click CAdvanced Settings in AMedia Type.
3. In the Paper Detailed Settings dialog box displayed next, select the desired settings values in
BBetween Pages and CBetween Scans in ADrying Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Windows) (4.1.10).")
To Next Page
Loading...
Need help?
General