10. 4. 1. Maintenance > Cleaning the Printer >
Cleaning the Printer Exterior
Clean the printer regularly to maintain better printing quality and help prevent problems.
To ensure a comfortable working environment, clean the printer exterior about once a month.
1. Turn the printer off. (See "Turning the Printer On and Off (8.2.2).")
2. Unplug the power cord from the outlet.
Caution
ï½¥ Always turn off the printer and unplug the power cord before
cleaning or maintenance. Accidentally leaving the printer on poses a
risk of injury if you touch moving parts inside the printer.
3. Using a damp cloth that you have wrung out completely, wipe the exterior surfaces of the
printer. Dry the surfaces with a dry cloth.
Caution
ï½¥ Never use flammable solvents such as alcohol, benzene, or thinner. If
these substances come into contact with electrical components inside
the printer, there is a risk of fire or electrical shock.
Important
ï½¥ If the Ejection Guide is dirty, it may soil the edge of the paper when
the paper is cut. We recommend cleaning the Ejection Guide even if it
does not appear dirty, because it may actually be covered with paper
dust.
4. Plug the power cord into the outlet.
To Next Page
Loading...
Need help?
General