12. 1. 51. Error Message > Error Messages >
This paper cannot be used.
Cause Corrective Action
Paper smaller than the printer's
minimum supported size has
been loaded.
Push the Release Lever back and load
paper of the correct size.
(See "Paper Sizes (6.1.2).")
Paper has been loaded that is
too small to print the test
pattern for printhead
adjustment or nozzle checking.
Push the Release Lever back and load
unused paper of A4 size or larger. More
than one sheet may be required
depending on the adjustment.
To Next Page
Loading...
Need help?
General