11. 4. 1. Troubleshooting > The printer stops during a print job >
An error message is shown on the Display Screen
Status Corrective Action
An error message is
displayed during printing.
Check the error message and take action as
necessary.
(See "Error Messages.")
The last portion of roll
paper was used during a
print job, and paper could
not be advanced because
the trailing edge is taped
to the roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the
Printer (
6.2.6).")
(See "Removing the Roll Holder from
Rolls (
6.2.7).")
(See "Loading and Printing on Rolls (1.1.2).")
To Next Page
Loading...
