11. 2. 10. Troubleshooting > Problems Regarding Paper >
Roll Paper is Continuously Ejected
Cause Corrective Action
Although sheets are
selected as the paper
source, a roll was
advanced.
After roll ejection stops, follow these steps to
reload the roll.
1. Push the Release Lever back.
2. Open the Roll Cover.
3. Using both hands, rotate the Roll Holder
toward the back to rewind the roll. At this
time, ensure that both ends of the roll are
rewound evenly.
4. Pull the Release Lever forward.
5. Load the roll. At this time, be sure to
press the Load button and select Load
Roll Paper.
(See "Loading Rolls in the Printer (
6.2.2).")
To Next Page
Loading...
