Caution
･ Do not replace the Maintenance Cartridge during initialization immediately
after turning on the printer, during Printhead cleaning, or when ink is being
absorbed. Ink may leak out.
Access the menu for Maintenance Cartridge replacement
1.
On the Tab Selection screen of the Control Panel, press or to select the Settings/
Adj. tab (
).
Note
･ If the Tab Selection screen is not displayed, press the Menu
button.
2. Press the OK button.
The Set./Adj. Menu is displayed.
3. Press or to select Maintenance, and then press the OK button.
4. Press or to select Repl. maint cart, and then press the OK button.
A message on the Display Screen advises you to open the Maintenance Cartridge Cover.
Replace the Maintenance Cartridge
1.
Open the box, remove the plastic bag and packaging material, and take out the
Maintenance Cartridge.
To Next Page
Loading...
