1. 1. 7. Basic Printing Workflow > Printing procedure >
Specifying Paper in the Printer Driver (Mac OS X)
If you have replaced the paper, you must complete the following settings in the printer driver.
1. This sets the BFormat for and CPaper Size.
Note
･ The configuration method varies depending on the OS and application software
you are using.
If Page Setup is displayed in the application menu, the settings are configured by
opening the Page Attributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the upper part of the printer
driver displayed when you select Print from the application software menu.
To Next Page
Loading...
