11. 3. 1. Troubleshooting > Printing does not start >
The Data Reception Lamp on the Control Panel does not
light up
Cause Corrective Action
The printer is not on.
Make sure the power cord is securely
plugged in, all the way. Press the Power
button to turn on the printer.
The printer is not selected
in the printer driver. (The
printer is in Sleep mode.)
In Windows, select the printer by clicking
Select Printer or Printer in the printing
dialog box and try printing again.
In Mac OS X, select the printer by clicking
Printer Setup Utility (or Print Center )
and try printing again.
The print job is paused.
(The printer is in Sleep
mode.)
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers
and Faxes (or Printers ) window.
2. Clear Pause Printing in the File
menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified
as Printer Setup Utility in some
versions of Mac OS X.)
2. Select the printer, and then Start
Jobs in the Printers menu to restart the
print job.
To Next Page
Loading...
