11. 5. 11. Troubleshooting > Problems with the printing quality >
The length of printed images is inaccurate in the feeding
direction
Cause Corrective Action
In the Control Panel
menu, Adj. Priority is
set to Print Quality.
Set Adj. Priority to Print Length in the
Control Panel menu, and then execute Adjust
Length.
(See "Adjusting the Feed Amount (7.2.1).")
The type of paper
specified in the printer
driver does not match
the type loaded in the
printer.
Load paper of the same type as you have
specified in the printer driver.
(See "Loading Rolls in the Printer (6.2.2).")
(See "Loading Sheets in the Printer (6.3.1).")
Make sure the same type of paper is specified
in the printer driver as you have loaded in the
printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer
driver and try printing again.
To Next Page
Loading...
Need help?
General