6. Click OSize Options to display the Paper Size Options dialog box.
7. In the Paper Size Options dialog box, select the Oversize check box in Display Series.
8. Click OK to close the Paper Size Options dialog box.
9. Click Oversize - ISO A4 in the APage Size list.
10. Click Roll Paper in the LPaper Source list.
11. Select the width of the loaded roll in the MRoll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
12. Confirm the print settings and print as desired.
Note
･ For tips on confirming print settings, see "Confirming Print Settings (
4.1.3)"
To Next Page
Loading...
