3. 6. 2. Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing Vertical or Horizontal Banners (Large-Format Printing;
Windows)
This topic describes how to print a banner about five times as long as the roll width based on the
following example.
● Document: A horizontal banner created in Microsoft Word
● Page size: Non-standard (100×500 mm [3.9×19.7 in])
● Paper: Roll
● Paper type: Plain Paper
● Roll paper width: 16 in (406.4 mm)
Follow the steps below to print a banner in either horizontal or vertical format.
1.
Register a Custom Paper Size.
Banners tend to be in non-standard sizes, so register a Custom Paper Size. In this example,
100×500 mm (3.9×19.7 in) is registered.
2. In the application, create an original in the size you registered.
3. Print the banner, using the settings that correspond to banners.
Registering a Custom Paper Size
This example describes how to register a paper size that is horizontally elongated and suitable for banners
in either horizontal or vertical format.
1.
Display the printer driver dialog box.(See "Accessing the Printer Driver Dialog Box from the
Operating System Menu (
4.1.7)")
2. Click the Page Setup tab to display the Page Setup sheet.
To Next Page
Loading...
Need help?
General