8. Click OSize Options to display the Paper Size Options dialog box.
9. Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this
example.
10. Select mm in Units.
11. Enter 430 (16.9 in) in both Width and Height.
Note
･ If you select the Fix the Ratio of the Width to Height check box, after
you enter a value in either Width or Height, the other value will be
automatically applied based on the original aspect ratio.
12. Click Add to register 430 mm Square.
13. Click OK to close the Paper Size Options dialog box.
14. Click Manual in the LPaper Source list.
15. In the APage Size list, click the size you added, "430 mm Square".
16. Confirm the print settings and print as desired.
Note
To Next Page
Loading...
