5. Make your selection in the EPrint Target list.
6. Make your selection in the FPrint Quality list.
7. Click the Page Setup tab to display the Page Setup sheet.
8. In the APage Size list, click the size of the original as specified in the application. In this case,
click ISO A4 or Letter (8.5"x11").
9. In HOrientation, click JLandscape.
10. Click Roll Paper in the LPaper Source list.
11. Select the width of the loaded roll in the MRoll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
12. Confirm the print settings and print as desired.
Note
･ For tips on confirming print settings, see "Confirming Print Settings (
4.1.3)"
To Next Page
Loading...
