● (See "Specifying the Ink Drying Time for Rolls (6.2.12)")
CBetween Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
DBetween Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
ERoll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to
curling is held firmly against the Platen.
FNear End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
GCut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when
automatic cutting is used.
HAutomatic Cutting
You can activate or deactivate automatic cutting and printing of cut lines, as desired. In this list, specify
Printer Default, None, or Print Cut Guideline.
JMirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document
or image with the left and right sides inverted.
To Next Page
Loading...
