･ For details on supported sizes and types of rolls, see Paper Sizes (See "Paper
Sizes (
6.1.2).") (See "Types of Paper (6.1.1).")
･ To view instructions as you attach the Roll Holder, press the Navigate button. (See
"How to View Instructions With Navigate (
8.2.4).")
1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the
position indicated (b), remove it from the Roll Holder.
2. Insert the respective attachments for the roll paper core on the Roll Holder and Holder Stopper.
● Using rolls with a 2-inch paper core
Holder Stopper (Left Side)
Roll Holder
(Right Side)
Align the tips (a) of the 2-Inch Paper Core Attachment
with the holes (b) of the Holder Stopper and insert it
firmly.
No attachment is
needed.
● Using rolls with a 3-inch paper core
Holder Stopper (Left Side) Roll Holder (Right Side)
To Next Page
Loading...
