Make sure the paper you select is loaded in the printer.
7.
After confirming that DEasy Settings is selected, click Photo (Color) in the EPrint Target list.
Note
･ For information on settings optimized for printing photos and images, see
"Printing Photos and Images (
2.2.1)"
･ You can check the settings values selected in the
EPrint Target list by
clicking
GView set..
8. Make your selection in the FPrint Quality list.
9. Access the Page Setup pane.
10. Click Roll Paper in the APaper Source list.
11. Make sure the width of the loaded roll is displayed in the BRoll Width list-in this case, 10 in.
(254.0mm).
Note
To Next Page
Loading...
