Specifying menu items
Menu items can be set as follows.
1.
Press or to select the desired setting, and then press the OK button.
After two seconds, the display reverts to the upper level menu.
Note
･ If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is
applied, and the printer is now in Standby.
Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1.
Press the or button to move to the next field for input.
2. Press the or button to enter the value.
Note
･ Hold down
or to increase or decrease the value continuously.
3. Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Note
･ If a confirmation message is displayed regarding the setting you entered, press the OK button. The setting is
applied, and the printer is now in Standby.
Executing menu commands
Menu commands can be executed as follows.
To Next Page
Loading...
