Comm.Mode
Choose the LAN communication
method.
Ethernet Type
Choose the LAN transfer rate.
Spanning Tree
Choose whether spanning-tree
packets are supported over the LAN.
MAC Address
Indicates the MAC address.
Interface Print
Print interface settings information.
Return Defaults
Choose OK to restore Interface
Setup settings to the default values.
System
Sleep Timer
Specify the period before the printer
enters sleep mode.
Buzzer
Choose On for the buzzer to sound in
case of errors.
Contrast Adj.
Adjust the Display Screen contrast
level.
Date & Time
Date
Set the current date.
Time
Set the current time. Available only if
the Date setting is specified.
Date Format
Specify the date format.
Language
Specify the language used on the
Display Screen.
Time Zone
Specify the time zone. Time zone
options indicate a main city in this
time zone and the difference from
Greenwich Mean Time.
Length Unit
Choose the unit of measurement
when roll length is displayed. Change
the unit displayed for the remaining
amount of roll paper.
Detect Mismatch
Specify printing behavior if the type
and size of paper specified in the
printer menu does not match the type
and size in the printer driver.
Choose Pause to have printing
paused under these circumstances.
Choose Warning to continue printing
after notification. Choose None to
continue printing without notification.
Paper Size Basis
Roll Selection 1
If roll size detection is activated,
choose whether ISO A3 (297mm) or
300mm Roll is applied when a roll of
an intermediate width is detected.
Roll Selection 2
If roll size detection is activated,
choose whether 10in. (254mm) or
JIS B4 (257mm) is applied when a
roll of an intermediate width is
detected.
To Next Page
Loading...
Need help?
General