11. The length of printed images is inaccurate in the feeding direction
12. Images are printed crooked
13. Documents are printed in monochrome
14. Line thickness is not uniform
15. Lines are misaligned
16. Problems with the printing quality caused by the type of paper
11. 6. Cannot print over a network
1. Cannot connect the printer to the network
2. Cannot print over a TCP/IP network
3. Cannot print over a NetWare network
4. Cannot print over AppleTalk or Bonjour networks
11. 7. Installation problems
1. Removing Installed Printer Drivers
11. 8. HP-GL/2 problems
1. With HP-GL/2, printing is misaligned
2. Lines or images are missing in printed HP-GL/2 jobs.
3. Lines are printed too thick or thin in HP-GL/2 print jobs
4. HP-GL/2 jobs are printed in monochrome (or color)
5. Printed colors of lines are inaccurate during HP-GL/2 printing
6. HP-GL/2 jobs are printed 6 mm larger than specified
7. HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
8. HP-GL/2 printing takes a long time
9. Replotting with HP-GL/2 jobs is not possible.
10. The printer stops when printing a HP-GL/2 job (the carriage stops moving)
11. 9. Other problems
1. The printer does not go on
2. If the Printer Makes a Strange Sound
3. Messages advising to check the maintenance cartridge are not cleared
4. The printer consumes a lot of ink
5. Ink Level Detection
To Next Page
Loading...
Need help?
General