the following conditions. Note that other
operations are not possible while
"Agitating" is displayed on the control
panel.
･ After the printer is turned on. (The
time for agitation varies depending on
how long the printer was off—between
about 30 seconds and two minutes.)
･ After data transmission. (After about a
minute and a half, printing operations
begin. However, printing may start later
after data reception, depending on the
size of print data.)
･ After ink tank replacement. (Ink
agitation takes about three and a half
minutes.)
In other cases, contact your Océ dealer.
To Next Page
Loading...
