Oce CS2436 - Page 751

Error Message (CS2436-12)
12. 1. 13. Error Message > Error Messages >
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in
a HP-GL/2 command is
out of the supported
range.
Check the print job.
If you have specified ProcessingOption
>Warning >On in the Control Panel menu,
set it to Off instead.
file:///H|/ITC-dd/Projects/Ud/WFPS/oostende%205...ort/iPF750%20User%20Manual/lang/print/cp10.html (18 of 133) [4-3-2010 11:37:37]