12. 1. 49. Error Message > Error Messages >
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
Cause Corrective Action
The loaded paper
is too small.
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1. Press or to select Change Paper, press
the OK button, and remove the paper.
(See "Removing Sheets (
6.3.4).")
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets (
1.1.3).")
The printer will resume printing.
Press
or to select Stop Printing, and then
press the OK button.
"Replace roll with 10 in. wide or larger roll."
Cause Corrective Action
The loaded paper
is too small.
Replace the roll with a roll 10 inches in width or
larger as follows.
1. Press or to select Change Paper, and
then press the OK button.
(See "Removing the Roll from the
Printer (
6.2.6).")
(See "Removing the Roll Holder from
Rolls (
6.2.7).")
2. Replace the roll with a roll 10 inches wide or
larger.
(See "Attaching the Roll Holder to Rolls (
6.2.1).")
(See "Loading Rolls in the Printer (
6.2.2).")
The printer will resume printing.
Press
or to select Stop Printing, and then
press the OK button.
"Remove paper and check pap. size"
Cause Corrective Action